SSLはインターネット上の情報のやり取りを暗号化し第三者にわからなくする事でプライバシーを守ります。インターネットのショップなどで、主に注文をする時などにSSLが使われておりクレジットカードなどの情報が他人に渡らないようになっています。 ところが今までのFTPではこのような技術は使われておらず、FTPを通して何が転送されているかを第三者が知る事も可能でした。しかしこの度 RaidenFTPD ftpサーバーにより、FTPコマンドとデータをSSLで暗号化する事が可能となりました。


other links: Music server | MP3 jukebox software

| | コメント (0) | トラックバック (0)

How to setup an FTP server

How to setup an FTP server step-by-step guide

This step-by-step article describes how to install and configure a File Transfer Protocol (FTP) server software for Windows XP/Vista/7 for private or public users to access.

Step 1: download FTP server software

The first step is to download an FTP server software for Windows operating system, we recommend you the RaidenFTPD FTP server software.

FTP server
RaidenFTPD FTP server download page

Download the software (raidenftpd2.exe) and open it to launch the setup procedure, just click I agree and next next and next to finish the setup program.

how to setup an ftp server step1

After it is installed, you will see an RaidenFTPD icon on your desktop

And a program group called RaidenFTPD under your start menu

And the RaidenFTPD program will also be opened automatically for the first time, and you will notice that there will also be an icon on your task bar notification area to indicate that RaidenFTPD program is now running.

Step 2: configure the FTP server software

After you install and start the RaidenFTPD FTP server software, the first thing to do is to start up your FTP server, there are some basic things you need to know before you do it.

1. You need to specifiy a port number for FTP server to listen on, it's usually 21.
2. You need to prepare a root path for the FTP server, the root directory is the place where your FTP users will see and be locked to when they connect and login your server.
3. Anonymous access means if you want to allow anyone to connect to this server without having a named account and password, usually this is set to OFF for a private server.

Now we can start to configure the FTP server

first step to setup an FTP server

Specify a server name, anything you like.

Specify IP,PORT,ROOT path and click next.

In the second step you don't need to change anything and click next.

In the last step click ok and it's done.

Step 3: Create the 1st user account

The key point to setup an FTP server in Windows is to have named accounts, when creating an FTP user account on your RaidenFTPD ftp server software, and the following information will automatically be generated and copied to your system clip board.

You can launch batch users manager by clicking this icon or the menu >> setup >> users

how to open the RaidenFTPD ftp server user's manager

And groups. And it is automatically opened when your first server is started.

RaidenFTPD FTP server's users manager

click Add to create an user account. just enter the user name/pass, specify its user leve, and if it should be using server's VFS structure or not. finally when it finishes, the following information will be copied to clipboard.

Welcome to: RaidenFTPD32
server ip: port: 21
implicit ssl port: 0 explicit ssl port: 121
account: testuser password: testpass
ratio 1:0 credit: 0mb
direct IE url:

Now that you are an FTP site master, please forward the above information to your ftp client users, your users will be able to use Internet explorer to connect to your FTP server by the aboe direct IE url or using a professional FTP client such as CuteFTP Pro.

Step 4: Configure Firewall for FTP server

The difficult part for setting up an FTP server is not running the software itself, it is how to confgure the firewall software for FTP access. Most of the people maybe already using Windows XP/Vista built in firewall, RaidenFTPD FTP server can configure it automatically for you, however this Windows Firewall got a nasty problem that is the PASV port redirection.

PASV port redirection: FTP server software uses 1401-1410 ports for passive modes, you need to open them on your firewall software and make port forwarding on Routers. however Windows Firewall makes changes to those ports, for example the server listens on 1401 and the Windows Firewall will intercept it and change it to something like 5005 so what ever you map on your router will never be mapped. that simply means the port mapping on your router will not work. To make long story short, DISABLE WINDOWS FIREWALL IF YOU ARE RUNNING FTP SERVER BEHIND A ROUTER.

To disable Windows Firewall under Windows Vista, do the followings.

Start menu >> settings >> control panel >> security >> windows firewall >> change settings.

Turn off vista firewall in order to run FTP server behind a router

To manually setup other kind of Firewall softwares, open the following TCP ports: 21,1401-1410 and trust the executable file raidenftpd.exe (usually under c:\RaidenServers\RaidenFTPD)

You can determine the ports which will be used in this dialog box

There are too many kinds of Firewall softwares so we only list one as an example, but just remember the rules and it applies to all kinds of firewalls.

How to configure a firewall software for FTP server

Step 5: How to configure broadband router for external accesses to the FTP server

After the firewall is configured, you should be able to connect to your FTP server from any computer in the same network (probably behind the same broadband router or hub).

But before you configure the router, users on the internet still can not connect to your FTP server. Before we proceed we have a little knowledge to tell you. the PRIVATE IP-Address and WAN IP-Address.

PRIVATE IP-Address: all computers connect to the internet via a broadband router (usually called NAT) may be assigned with a PRIVATE IP-Address, private IP-Address is used only locally and privately, it is not accessible from the internet, only computers on the same hub or router can access to each other with a private IP address. it is usually something like the following: - (10/8 prefix) - (172.16/12 prefix) - (192.168/16 prefix)

WAN IP-Address: WAN IP-Address is given by your ISP, it is accessible from worldwide, usually it is used on your broadband router exclusively, but not the computers behind it. so You have to configure and tell the router about how to do the redirection so the server running on internal computer is accessible from internet.

Now you understand that you need to configure the router but how? it's simple, just lookup the private IP address of the PC that has the FTP server running, and connect to your router by web browser, login its administration interface, add port mapping (a.k.a. port forwarding or virtual server) for the following ports 21,1401-1410 and map them to your private IP-Address.

By the way, if you are using Windows Vista, it MAY find your router automatically (not guaranteed!), so just check open NETWORK on your desktop and if you find your router's model name in the NETWORK, just double click on it and the router's administration interface maybe opened. (if you are lucky enough).

double click on the router's model name, the admin interfaced MAYBE opened

smc router's administration interface automatically opened in Internet explorer

here is an example for Linksys router

Step 6: Test your FTP server

After you installed it, configured the Firewall, configured the router, you should be able to connect to your FTP server from home network by using your private IP-address or connect to your FTP server from outside of the router using your wan IP-address. You can use Internet explorer to test the connect, the url should be ftp://USER:PASS@YOUR_IP_ADDRESS:PORT/

Or it's better to use a FTP client to connect to your FTP server, it's more convenient and powerful.

Once you have your FTP server working, you maybe interested in setting up other kinds of internet servers, we recommend RaidenHTTPD web server and RaidenTunes streaming server. how to setup an ftp server

| | コメント (0) | トラックバック (0)





こちらから ダウンロード




デフォルトの場所へのインストールをお勧めします。Vistaユーザーの方は以下の点にご注意ください。 UACは無効にする必要があります。.


雷電Tunesを使用するにはPHP.iniを設定する必要があります。既にお使いのPHP.iniを手動で設定する場合は こちらをご覧ください。




既にポート80をお使いの場合は、81等の他の番号を指定してください。WindowsファイアウオールやUPnPルータをお使いの方はポート80を解放してください。ルータやファイヤウオールが自動設定に対応していない場合は、 こちらをご覧ください。








other links: Streaming server FTP server WEB server

| | コメント (0) | トラックバック (0)